HAIR GROWTH DEVICE LS‑D620
HAIR GROWTH DEVICE LS‑D620
Couldn't load pickup availability
Ⅰ.Highlights
1.Full‑Scalp Laser Coverage Design
Equipped with 80 Class II laser diodes (650‑660nm,<1mW). Uniform laser output covers the upper‑third scalp to deliver low‑level light therapy for androgenetic alopecia.
2.Intelligent Position‑Sensing Safety Design
Built‑in light‑emitting sensors. Therapy automatically pauses if the helmet moves away from the head and resumes upon correct wear, avoiding unnecessary laser radiation and improving safety.
3.External LCD Controller Design
Independent external controller with LCD screen shows 20‑minute treatment countdown clearly. Physical ON/OFF and START/PAUSE keys with beep feedback for every operation.
4. Long‑Life Rechargeable Helmet Design
Built‑in non‑detachable 3600mAh lithium‑ion battery, delivering up to 180min continuous working time for cord‑free home‑use. Compact helmet‑style housing for easy storage.
Ⅱ.Therapeutic Principle
This helmet uses 650‑660nm Class II low‑level laser diodes. Laser penetrates scalp to target follicle cells, enhancing micro‑circulation, nourishing follicles, activating dormant follicles and extending hair‑growth phase for regrowth in androgenetic alopecia users.
Ⅲ.Technical Parameters
| Item | Specification |
| Product Model | LS-D620 |
| Laser Wavelength | 650-660nm |
| Laser Class | Class 2, single-point output <1mW |
| Quantity of Laser Diodes | 80 pcs |
| Timing Setting | 20 mins ±10% |
| Display Type | LCD controller display |
| Built-in Battery | DC3.7V, 3600mAh non-detachable lithium-ion battery |
| Continuous Working Time | 180 mins |
| Input | DC5V / 2A (not operable during charging) |
| Net Weight | 993g±2% |
| Dimension | (L)272mm × (W)218mm × (H)153mm |
| Operating Environment Temperature | 5℃-35℃ |
| Operating Environment Humidity | 15%-85%RH |
| Protection Grade | IP22 |
Ⅳ.Range Of Application
ALL‑IN‑ONE SCALP REGENERATION SOLUTION for male & female androgenetic alopecia.
For men: Hamilton‑Norwood IIa‑V androgenetic alopecia
For women: Ludwig‑Savin I‑II androgenetic alopecia
Suitable for Fitzpatrick skin phototype I‑IV users.
Ⅴ.How to Use
Pre‑treatment preparation
Ensure hair is fully towel‑dried (Do NOT use on wet hair). Inspect helmet, controller and data cable for damage before use. Prepare qualified charger complying with IEC60601‑1 with DC5V2A output.
Wearing steps
Put on the laser helmet correctly to trigger the position‑sensing sensor.
Operation steps
Connect helmet and controller with supplied data cable. Hold ON/OFF for 2seconds to power on. Short‑press START/PAUSE to start the 20‑minute treatment countdown; short‑press again to pause. Device beeps and auto‑powers off when timing finishes. Hold ON/OFF for 2seconds for manual power‑off.
> Note: The controller cannot boot while charging.
Usage cycle suggestion
20min per session, 2‑3 times weekly with minimum 24‑hour interval between treatments. Recommended continuous use cycle: 16 weeks. Adjust subsequent frequency according to personal hair‑growth results.
Share
